Search This Supplers Products:LED PanelLED TubeLED SpotlightLED BulbLED DownlightLED Strips
Packging & Delivery
Min Order1 piece
Briefing
Detailed
The first solution intelligent sound control
The characteristics of sound is detect the invoice,if the environment is very noisy,the tube will always be light.On the contrary,if it's very quiet,it won't happen,so the sensitivity is very important,view as this problem,OSMAN launched the adjusted solution of sensitivity and time,the user can setting up the sensitivity,but some users aren't familiar with it,they will break the adjusted button,it must be careful.
The human body is to be testd onthe characteristics of induction solutions from the human body pyroelectric infrared, using the Fresnel lens collection of human body infrared energy, the obese, the infrared energy out more, conversely, the thin out of the infrared ray energy less. Therefore, the obese and the thin of the sensitivity of the sensor is different. The general distance of it is 2 to 4 m. And for someone to the occasion. Because of pyroelectric infrared sensor is used to test the infrared ray of the human body, the human body temperature is generally 37.5 degrees, and LED the average temperature near sun lamp holder is 40-45 degrees or so, so the temperature and lighting interference by fluorescent lamp is larger. According to this problem, osman lighting launched a new light and heat insulation between the lamp holder, which can effectively solve the light and heat of interference needed .General recommendation, the human body is the induction more adapted to the corridor to the fluorescent tubes, if applied to the parking lot, it needs careful confirmation to the the relationship with the people . At first use, and the CPU of a period to reset the time, the second time the trigger is to be begun accurately.
The third solution: Intelligent radar induction solution
The intelligent radar induction solution adopt the Doppler S principle, launch around 5.8GHz microwave radar signal, When there is a moving object into the radar electromagnetic field, it can feedback signals to the receiving circuit, and then trigger to change the circuit's working condition. The general induction distance can reach 5-9M, it can be triggered as soon as have moving object. But it will not trigger if the object haven't moving even in the trigger field. The radar induction can penetrate non-metallic objects, such as gypsum, wood etc, particularly suitable for covert installation. Please must pay attention, if there is a metal object block launch surface, it will greatly reduce the sensitivity. Radar induction interference effect is small, and sensitivity is higher, so, it particularly suitable for underground parking lot lighting solutions.
Electrical Characteristics | |||
NO. | ltem | Unit | Parameter |
1 | T8 | mm | φ26 |
2 | Operating Voltage | V | AC100-240 |
3 | Operating Frequency | Hz | 50/60 |
4 | Operating Power | W | 16 |
5 | Operating Factor | / | >0.85 |
Photometric Characteristics | |||
1 | LED QTY | Pcs | 240PCS/3528SMD |
2 | Luminous Flux | lm | 1350-1450 |
3 | Viewing Angle | ° | 120 |
4 | Luminous Efficient | Lm/W | 100 |
5 | Color Temperature | K | 5700-6300 |
6 | Working Life | H | >30000 |
Environmenntial Range | |||
1 | Operating Range | °C | -20~+ |
2 | Operating Humidity | RH | <60% |
3 | Storage Range | °C | -20~+ |
4 | Storage Humidity | RH | 35%---45% |
Dimension | |||
1 | Fluorescent Lamp Size | mm | Φ26× |
2 | Pachage Size | mm | 1250*200 |
3 | QTY Of Each Carton | Pcs | 20 |
|
|
| |
|
|
|
Installation process:
1、 Please check switch if it’s be closed before installation.
2、 Plese check circuitry if it’s correct,it electrifies to two sides of Tube directly without selenium rectifier.
3、Please check Tube if it’s broken ,don’t use it if it’s not good !
4、It can work if there is no wrong after installation as above
Application:
This products can be widely used in office buiding、work shop、school 、hospital、supermarket、underground parking lot、hotel etc.CE、TUV has been approved.Anti-jamming capacity is very strong.Votalge is AC85-265V,it can widely used in everywhere of different country!we choose high brightness and low decay time LED to be good thermolysis effect! Decay time is under control!Easy intallation ,safety,no need maintenance,save energy.It has long life .Normally its life can reach more than 50,000 hours.Green product!
Attention :
1、Please check circuitry if it with good connection if Tube can’t work
2、Don’t clear Tube with wet towel
3、Don't install the product under damp、leakage. and unstrong place。
4、Please cut circuitry before intallation and disassembly!
5、Please install with right way which we provide for you!
6、Please contact professtional person for maintenance if it’s broken!
7、Don’t dismantle products by yourself!
Packing:
Step 1: Wrap tube with air bladder bag!
Step 2:Put tube into paper pipe,two sides with paper cover!
Step 3: Put Tube with good packing into carton box !
Structure picture of product
Installation:
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.